Hospital Icu Bed Five Function Electric Bed multiple Functions
1. Bed frame and mattress base are made of powder coated steel. Four roof sections are perforated evenly and should be properly mounted on the main frame. The bed frame is sturdy and stable, supporting at least 250 kilograms.
2. The bed surface adopts 1.2 mm cold rolled steel plate integral stamping process, the bed body adopts square steel welding, the surface adopts plastic spraying treatment, anti-rust, anti-corrosion, stable and durable as a whole.
3. The head/end of the bed adopts ABS injection molding technology, anti-aging and antibacterial. Head board and footboard adopt automatic locking device. In case of emergency, it is convenient to disassemble rescue, special care and safe transport of patients. Head and tail board all have grasp handle that designs by human body engineering principle, facilitate carry out.
4. All electric control, and indicators show the working status. The use of easy to operate touch switch, to solve the mechanical keyboard service life is limited, keys due to continuous operation and failure.
5. The electric remote control provides the following functions: 1. Backrest elevation 2. High and low elevation 4. Trendelenburg position 5. Reverse Trendelenburg position. 6. One-touch CPR button for quick recovery.
6. - Four ABS guardrails on the side are equipped with Angle indicators, through which nursing staff can monitor the patient's head Angle.
Bed exit alarm
X-ray translucent back section
|Overall size||2175*990 *420-800mm|
|Bed length extension||145mm|
|Lying size||1960*900 mm|
|Back section up/down||0-75°|
|Foot section up/down||0-45°|
|Safe loading capacity||230kg|